Lincoln Navigator: Body and Paint / Body Closures
			
			
			
   Removal
 NOTE: 
 Removal steps in this procedure may contain installation details.
 
 
 
 
 
 NOTE: 
 
 RH side shown, LH side similar.
 
 On both sides...
   
 
   
 
 
 
 
 
 Item
 Description
 
 
 1
 Liftgate anti-pinch switches
 
 
 2
 Power liftgate motors
 
 
 3
 
 RGTM 
 
 
 
 4
 Hands-free liftgate actuation upper sensor (if equipped)
 
 
 5
 Hands-free liftgate actuation lower sensor (if equipped)
 
 
 6
 Hands-free liftgate actuation module (if equipped)
 
 
 7
 Power liftgate latch
 
 ..
   
 
   Other information:
   Removal
  
 WARNING: 
 The following procedure describes critical repair steps 
required for correct seat component installation. Follow all notes and 
steps carefully. Do not place any objects between the seat components 
and the body of the vehicle, nor any objects within a joint internal to 
the seat structure. Failure to follow step instructions may result in 
incorrect operatio..
   
   
 
 Bring the engine to normal operating temperature. Connect 
the Vacuum/Pressure Tester to the intake manifold. Run the engine at the
 specified idle speed.
 
 
 
 
 
 The vacuum gauge should read between 51-74 kPa (15-22 in-Hg)
 depending upon the engine condition and the altitude at which the test 
is conducted. Subtract 4.0193 kPa (1 in-Hg) from the specified reading 
for every..