Lincoln Navigator: Body and Paint / Supplemental Restraint System
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the third row single seat.
Refer to: Third Row Seat (501-10C Third Row Seats, Removal and Installation)...
Item
Description
1
Driver and passenger front impact severity sensors
2
Passenger front door side impact sensor
3
FCIM (includes PAD indicator)
4
OCSM (includes OCS sensor and gel-filled bladder)
5
Driver and passenger C-pillar side impact sensors
6
RCM
7
Clockspring
8
Driver front do..
Other information:
The front drive axle consists of:
A cast-aluminum center section, a removable cast-aluminum
axle housing tube and a differential housing cover. Both the axle
housing tube and the differential housing cover use silicone sealant as a
gasket.
A hypoid-design gearset of an 8.8-inch ring gear and a
pinion gear. Two opposed tapered roller bearings support the drive
pini..
Repair
NOTE:
Do not machine the brake discs for any brake noise concern
(squeal, squeak, moan, groan, grunt, grind, etc.). Brake disc machining
is allowed if one of the below conditions is present;
Excessive corrosion/rust and/or pitting on the braking surface.
Excessive bluing discoloration and/or heat spots on the braking surface.
Scoring of the brake disc surfac..