Lincoln Navigator: Engine / Fuel Charging and Controls - 3.5L EcoBoost (272kW/370PS)

Transmission Fluid Heater Coolant Control Valve. Removal and Installation

Special Tool(s) / General Equipment Hose Clamp Remover/Installer Removal   WARNING: When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth...

Fuel Charging and Controls - Component Location. Description and Operation

3.5L EcoBoost Item Description 1 Throttle body 2 High-pressure fuel pump 3 Port injection fuel rail assembly 4 Port injection fuel injector 5 Direct injection fuel injector 6 Direct injection fuel rail Fuel Pump Driver Module Item Description 1 Side frame mounted..

Other information:

Lincoln Navigator 2018-2026 Workshop Manual: Rear Blower Motor. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the RH loadspace trim panel. Refer to: Loadspace Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). Disconnect the blower motor electrical connector. Detach the rear blower motor wiring harness. R..

Lincoln Navigator 2018-2026 Workshop Manual: Fuel Lines. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation steps. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation). Disconnect the battery ground cable. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). ..