Lincoln Navigator: Engine / Evaporative Emissions - 3.5L EcoBoost (272kW/370PS)

Lincoln Navigator 2018-2026 Workshop Manual / Engine / Evaporative Emissions - 3.5L EcoBoost (272kW/370PS)

Charge Air Cooler (CAC) Outlet Pipe. Removal and Installation

Removal NOTICE: The turbocharger compressor vanes can be damaged by even the smallest particles. When removing any turbocharger or engine air intake system component, ensure that no debris enters the system...

Evaporative Emissions - Overview. Description and Operation

Overview The EVAP system prevents hydrocarbon emissions from entering the atmosphere by storing fuel vapors and routing the vapors to the engine to be consumed during normal engine operation...

Other information:

Lincoln Navigator 2018-2026 Workshop Manual: Rear Driveshaft. Removal and Installation

Special Tool(s) / General Equipment Flat Headed Screw Driver Tire Lever Removal All vehicles With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting (100-02 Jacking and Lifting) ...

Lincoln Navigator 2018-2026 Workshop Manual: Engine Cooling System Flushing. General Procedures

Materials Name Specification Motorcraft® Premium Cooling System FlushVC-1 ESR-M14P7-A Flushing WARNING: Always allow the engine to cool before opening the cooling system. Do not unscrew the coolant pressure relief cap when the engine is operating or the cooling system is hot...

Rear Camber Adjustment. General Procedures

Special Tool(s) / General Equipment

Wheel Alignment System

Activation

NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

Using alignment equipment and the manufacturer's instructions, measure the rear camber.
Use the General Equipment: Wheel Alignment System