Lincoln Navigator: Automatic Transmission / Automatic Transmission External Controls
- External Controls - Component Location. Description and Operation
- External Controls - Overview. Description and Operation
- External Controls - System Operation and Component Description. Description and Operation
- External Controls. Diagnosis and Testing
- Emergency Park Position Release. General Procedures
- Stay in Neutral - No Start. General Procedures
- Brake Shift Interlock Override Switch. Removal and Installation
- Downshift Paddle Switch. Removal and Installation
- Gear Shift Module (GSM). Removal and Installation
- Upshift Paddle Switch. Removal and Installation
Transmission Fluid Heat Exchanger. Removal and Installation
Special Tool(s) /
General Equipment
Hose Clamp(s)
Materials
Name
Specification
Motorcraft® MERCON® ULV Automatic Transmission FluidXT-12-QULV
WSS-M2C949-A, MERCON® ULV
Removal
With the vehicle in N , position it on a hoist...
External Controls - Component Location. Description and Operation
Item
Description
1
GSM
Item
Description
1
Downshift paddle switch
2
Upshift paddle switch
..
Other information:
Lincoln Navigator 2018-2026 Workshop Manual: Transmission Fluid Auxiliary Pump. Removal and Installation
Removal NOTE: It is not necessary to remove the transmission fluid filter to remove the transmission fluid auxiliary pump. Remove the transmission fluid pan and gasket. Refer to: Transmission Fluid Pan, Gasket and Filter (307-01 Automatic Transmission - 10-Speed Automatic Transmission – 10R80, Removal and Installation). Remove the bo..
Lincoln Navigator 2018-2026 Workshop Manual: Roof Rail. Removal and Installation
Special Tool(s) / General Equipment Interior Trim Remover Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: RH side shown, LH side similar. If equipped. Remove the bolts and the roof luggage carriers. Torque: 36 lb.in (4.1 Nm) Using a non-marring tr..
Categories
- Manuals Home
- 4th Gen Lincoln Navigator Service Manual (2018 - 2026)
- Transmission Fluid Level Check. General Procedures
- Brake Service Mode Activation and Deactivation. General Procedures
- Rear Bumper. Removal and Installation
- SYNC Module [APIM]. Removal and Installation
- Identification Codes. Description and Operation
Diagnostic Methods. Description and Operation
This document provides critical diagnostic knowledge required for successful repair outcomes. It identifies technical competencies expected by users of this manual.
Ford Diagnostic Assumptions
Ford diagnostics assume the vehicle concern described by the test title is currently present. Exceptions to this rule are noted in each test. Do not replace modules or other components as directed by a diagnostic if the concern is not present at the time of testing.
