Lincoln Navigator: Instrumentation and Warning Systems / Parking Aid

Horn. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. Remove the front bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation)...

Specifications

  General Specifications - Rear Parking Aid Item Specification Test object position 1 (P1) and position 5 (P5), distance from rear bumper 25 cm (10 in) Test object position 2 (P2) and position 4 (P4), distance from rear bumper 50 cm (20 in) Test object position 3 (P3), distance from..

Other information:

Lincoln Navigator 2018-2026 Workshop Manual: Rear Drive Axle and Differential. Description and Operation

The 9.75-inch ring gear rear conventional differential has 3.31 and 3.73 gear ratio versions. The 9.75-inch ring gear rear differential with eLSD has 3.73 gear ratio. Rear Drive Axle and Differential The rear axle assembly consists of the following: Integral-type housing hypoid gear design (center of the pinion set below the centerline of the ring gear) Hypoid differentia..

Lincoln Navigator 2018-2026 Workshop Manual: Side Obstacle Detection Control Module (SODCM). Removal and Installation

Removal Side obstacle detection control module NOTE: This step is only necessary if the SODL or SODR is being replaced. Using a diagnostic scan tool, begin the PMI process for the SODL or SODR following the on-screen instructions. Remove the rear bumper cover. Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation). ..