Lincoln Navigator: Climate Control System - General Information / Specifications
LUBRICANTS, FLUIDS AND CAPACITIES
NOTE: Per the warranty and policy manual the Ford Engineering-approved refrigerant (see table for service part number) must be used for air conditioning repairs
| ITEM | CAPACITIES |
|---|---|
| US, Canada, PAG oil used with R1234YF: Material: Motorcraft® R-1234yf Refrigerant PAG Oil / YN-35 (WSS-M2C300-A2) | 3.5L EcoBoost 6.08 fl oz (179 ml) |
| Mexico, China, Asia, PAG oil used with R134a: Material: Motorcraft® PAG Refrigerant Compressor Oil / YN-12-D (WSH-M1C231-B) | 3.5L EcoBoost 6.08 fl oz (179 ml) |
| US, Canada, R1234YF refrigerant: Material: R-1234yf Refrigerant / YN-33-A (WSS-M17B21-A) | 3.5L EcoBoost, 36 - 38 oz (1.02 - 1.07 kg) |
| Mexico, China, Asia, R134a refrigerant: Material: Motorcraft® R-134a Refrigerant / YN-19 (WSH-M17B19-A) | 3.5L EcoBoost, 38 - 40 oz (1.07 - 1.13 kg) |
| Material: Motorcraft® A/C System Flushing Solvent / YN-23 | — |
| Material: Motorcraft® A/C Cooling Coil Coating / YN-29 | — |
A/C COMPRESSOR CLUTCH AIR GAP
| ITEM | MM |
|---|---|
| A/C compressor clutch air gap | 0.21 - 0.55 |
TORQUE SPECIFICATIONS
| ITEM | NM | LB-IN |
|---|---|---|
| A/C disc and hub bolt (EVDC Compressor) | 41 | 362 |
Climate Control System - Component Location. Description and Operation
Item
Description
1
Driver Side Register
2
In-Vehicle Temperature & Humidity Sensor
3
Auto Lamp & Sunload Sensor
4
Passenger Side Register
5
Center Registers
6
FCIM & HVAC Module
Item
Description
1
Air Distribution Door Actuator
2
Driver Side Register..
Other information:
Lincoln Navigator 2018-2026 Workshop Manual: Front Seat Cushion Cover. Removal and Installation
Special Tool(s) / General Equipment Interior Trim Remover Removal Passenger seat Remove the OCS . Refer to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). Driver seat NOTE: Seat with power head restraint shown, seat without power head restraint similar. R..
Lincoln Navigator 2018-2026 Workshop Manual: Cowl Side Panel. Removal and Installation
Special Tool(s) / General Equipment 6.5 mm Drill Bit 11 mm Drill Bit Rivet Gun Self-Piercing Rivet (SPR) Remover/Installer Belt Sander Hot Air Gun 8 mm Drill Bit Locking Pliers Materials Name Specification Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B, Henkel Teroson EP 5055 - ..
Categories
- Manuals Home
- 4th Gen Lincoln Navigator Service Manual (2018 - 2026)
- Transmission Fluid Level Check. General Procedures
- All Terrain Control Module (ATCM). Removal and Installation
- SYNC Module [APIM]. Removal and Installation
- Brake Service Mode Activation and Deactivation. General Procedures
- Rear Bumper. Removal and Installation
Rear Stabilizer Bar Link. Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
With the vehicle in NEUTRAL, position it on a hoist.Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).
NOTE: Use the hex-holding feature to prevent the stud from turning while removing the nut.
Remove and discard the 2 rear stabilizer bar link nuts and remove the rear stabilizer bar link.Torque: 46 lb.ft (63 Nm)
