Lincoln Navigator: Parking Brake and Actuation / Parking Brake - Overview. Description and Operation
Overview
The parking brake system uses 2 switch activated, ECU controlled motors to apply and release the rear brake calipers. The ABS
module controls and monitors the parking brake system and sets
Diagnostic Trouble Codes (DTCs) when a fault is present in the system.
The IPC illuminates the
parking brake warning indicator and displays a message in the message
center when a fault is present, when the parking brakes are applied and
when they are released.
Overview
The parking brake system uses 2 switch activated, ECU controlled motors to apply and release the rear brake calipers. The ABS
module controls and monitors the parking brake system and sets
Diagnostic Trouble Codes (DTCs) when a fault is present in the system...
Other information:
Removal
Remove the reversing lamp assembly.
Refer to: Reversing Lamp (417-01 Exterior Lighting, Removal and Installation).
Disconnect the coaxial cable connector.
Remove the screws and the bracket...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the rear bumper cover.
Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation).
Disconnect the electrical connector, disengage the
retainers from trailer hitch and position aside the wiring harness...