• Navigator Manuals
  • Service
  • New
  • Top
  • Sitemap
Lincoln Navigator Manuals

Lincoln Navigator: Electrical Distribution / Controller Area Network (CAN) Module Communications Network

Lincoln Navigator 2018-2025 Workshop Manual / Electrical Distribution / Controller Area Network (CAN) Module Communications Network

  • Controller Area Network (CAN) Module Communications Network - System Operation and Component Description. Description and Operation
  • Controller Area Network (CAN) Module Communications Network. Diagnosis and Testing
  • Gateway Module A (GWM). Removal and Installation

Electrical Distribution

..

Controller Area Network (CAN) Module Communications Network - System Operation and Component Description. Description and Operation

System Operation Overview Multiplexing is a method of sending 2 or more signals simultaneously over a single circuit. Multiplexing allows 2 or more electronic modules (nodes) to communicate over a twisted wire pair [data (+) and data (-)] network...

Other information:

Lincoln Navigator 2018-2025 Workshop Manual: Rear Floor Panel Reinforcement. Removal and Installation


Special Tool(s) / General Equipment 6.5 mm Drill Bit Polydrive Bit Socket Rivet Gun Self-Piercing Rivet (SPR) Remover/Installer Belt Sander Locking Pliers Materials Name Specification Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B, Henkel Teroson EP 5055 -  Seam SealerTA-2-B, 3M™ 08308, ..

Lincoln Navigator 2018-2025 Workshop Manual: Direct Current/Direct Current (DC/DC) Converter Control Module. Removal and Installation


Removal NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module. This information must be downloaded into the new module after installation. Upload the Direct Current/Direct Current (DC/DC) configuration to the scan tool by following the scan tool on-screen instructions. ..

Categories

  • Manuals Home
  • 4th Gen Lincoln Navigator Service Manual (2018 - 2025)
  • Brake Service Mode Activation and Deactivation. General Procedures
  • Second Row Seat. Removal and Installation
  • Front Bumper Cover. Removal and Installation
  • Remote Function Actuator (RFA) Module. Removal and Installation
  • Vehicle Dynamics Control Module (VDM). Removal and Installation

Rear Drive Axle and Differential. Diagnosis and Testing

Symptom Chart(s)

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).

Symptom Chart - Differential

  Symptom Chart - Differential


Condition Actions Axle overheating   GO to Pinpoint Test A Broken gear teeth on the ring gear or pinion   GO to Pi

read more

Copyright © 2025 www.linavigator4.com