Lincoln Navigator: Fuel System - General Information / Acceleration Control
Removal
NOTE:
Removal steps in this procedure may contain installation steps.
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation)...
Overview
The acceleration control consists of one of the following:
A fixed accelerator pedal and position sensor assembly.
An adjustable accelerator pedal and position sensor assembly...
Other information:
Special Tool(s) /
General Equipment
Spherical Cutter
Plasma Cutter
Air Body Saw
8 mm Drill Bit
MIG/MAG Welding Equipment
Materials
Name
Specification
Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B, Henkel Teroson EP 5055
-
Repair
NOTE:
The following provide general joining options for sect..
Bring the engine to normal operating temperature. Connect
the Vacuum/Pressure Tester to the intake manifold. Run the engine at the
specified idle speed.
The vacuum gauge should read between 51-74 kPa (15-22 in-Hg)
depending upon the engine condition and the altitude at which the test
is conducted. Subtract 4.0193 kPa (1 in-Hg) from the specified reading
for every..