• Navigator Manuals
  • Service
  • New
  • Top
  • Sitemap
Lincoln Navigator Manuals

Lincoln Navigator: Roof Opening Panel / Trough Assembly. Removal and Installation

Lincoln Navigator 2018-2026 Workshop Manual / Body and Paint / Roof Opening Panel / Trough Assembly. Removal and Installation

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. Remove the roof opening panel glass.
    Refer to: Roof Opening Panel Glass (501-17 Roof Opening Panel, Removal and Installation).
  1. Detach the trough assembly arms.
  1. Pull the trough assembly towards the front of the vehicle and remove the trough assembly.

Installation

  1. To install, reverse the removal procedure.

    Roof Opening Panel Shield. Removal and Installation

    Special Tool(s) / General Equipment Electric Drill Punch Vacuum Cleaner Removal NOTE: Removal steps in this procedure may contain installation details...

    Bumpers

    ..

    Other information:

    Lincoln Navigator 2018-2026 Workshop Manual: Timing Chain Tensioner. Removal and Installation


    Special Tool(s) / General Equipment 303-1655Tool, Camshaft Holding Removal NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan may cause engine failure. RH and LH tensioners ..

    Lincoln Navigator 2018-2026 Workshop Manual: F Clutch. Diagnosis and Testing


    Principles of Operation Symptom Chart F Clutch For F clutch operation, REFER to: F Clutch (307-01 Automatic Transmission - 10-Speed Automatic Transmission – 10R80, Description and Operation).   F Clutch Condition Possible Sources Action F clutch does not apply SSF mechanicall..

    Categories

    • Manuals Home
    • 4th Gen Lincoln Navigator Service Manual (2018 - 2026)
    • Front Seat. Removal and Installation
    • Identification Codes. Description and Operation
    • Power Running Board (PRB). Diagnosis and Testing
    • Transmission Fluid Level Check. General Procedures
    • Rear Bumper. Removal and Installation

    Front Driveshaft. Removal and Installation

    Special Tool(s) / General Equipment

    Crimping Tool

    Materials

    Name Specification Motorcraft® Premium Long-Life Grease
    XG-1-E1 ESA-M1C75-B
     

    Removal

    With the vehicle in NEUTRAL, position the vehicle on a hoist.
    Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).
    Remove the bolts and the transmission shield.

    read more

    Copyright © 2026 www.linavigator4.com