Lincoln Navigator: Parking Aid - Vehicles With: Active Park Assist / Specifications
General Specifications - Front
| Item | Specification |
|---|---|
| Active park assist sensor azimuth system check object position 1 (P1) distance from sensor | 50 cm (20 in) ± 10 cm (4 in) |
| Active park assist sensor azimuth system check object position 2 (P2) and position 3 (P3) distance from sensor | 391 cm (154 in) ± 20 cm (8 in) |
General Specifications - Rear
| Item | Specification |
|---|---|
| Active park assist sensor azimuth system check object position 4 (P4) distance from sensor | 25 cm (10 in) |
| Active park assist sensor azimuth system check object position 5 (P5) and position 6 (P6) distance from sensor | 150 cm (59 in) |
Parking Aid - Component Location. Description and Operation
Item
Description
1
Rear parking aid sensors
2
Parking aid switch/active park assist switch
3
IPMA
4
Front active park assist sensors
5
Front parking aid sensors
6
Front speakers
7
Rear speakers
8
Rear active park assist sensors
..
Other information:
Lincoln Navigator 2018-2026 Workshop Manual: Thermostat. Removal and Installation
Materials Name Specification Motorcraft® Yellow Concentrated Antifreeze/CoolantVC-13-G WSS-M97B57-A1 Motorcraft® Orange Concentrated Antifreeze/CoolantVC-3-B WSS-M97B44-D Removal NOTE: Removal steps in this procedure may contain installation details. Drain the cooling system. Refer to: Engine Cooling System Drain..
Lincoln Navigator 2018-2026 Workshop Manual: Cabin Heater Coolant Pump. Removal and Installation
Special Tool(s) / General Equipment Hose Clamp Remover/Installer Fluid Container Locking Pliers Removal NOTE: Removal steps in this procedure may contain installation details. WARNING: Always allow the engine to cool before opening the cooling system. Do not unscrew the coolant pressure relief cap when the engine is ope..
Categories
- Manuals Home
- 4th Gen Lincoln Navigator Service Manual (2018 - 2026)
- Front Seat. Removal and Installation
- Transmission Fluid Level Check. General Procedures
- Brake Service Mode Activation and Deactivation. General Procedures
- Identification Codes. Description and Operation
- Transmission Fluid Drain and Refill. General Procedures
Differential Case Runout Check. General Procedures
Special Tool(s) / General Equipment
205-1016Installer, Differential Bearing
TKIT-2014D-ROW2
TKIT-2014D-FL_ROW
205-153
(T80T-4000-W)
Handle
205-D061
(D83T-4205-C2)
Step Plate Dial Indicator Three Leg Puller Punch
