• Navigator Manuals
  • Service
  • New
  • Top
  • Sitemap
Lincoln Navigator Manuals

Lincoln Navigator: Electronic Engine Controls - 3.5L EcoBoost (272kW/370PS) / Specifications

Lincoln Navigator 2018-2025 Workshop Manual / Engine / Electronic Engine Controls - 3.5L EcoBoost (272kW/370PS) / Specifications


  Reference Value Symptom Chart

NOTE: The Reference Value Symptom Chart provides guidance in selecting the appropriate parameter identification (PID) or measured signal related to the fault area. Select a symptom from the symptom chart along with the category number and go to the PID/Measured Signal Chart. For multiple symptoms, select the symptom that is the most evident.


Symptom Occurs During Symptom Category Number
Startup: No start/Normal crank 1
  Hard start/Long crank 2
  Stall after start 3
  Diesels/Runs on 4
Idle: MIL 5
  Stalls/Quits 6
  Slow 7
  Slow return 8
  Rolling 9
  Fast 10
  Rough 11
  Misses 12
  Backfires 13
Acceleration: Stalls/Quits 6
  Misses 12
  Bucks/Jerks 14
  Backfires 13
  Hesitation 15
  Lack/Loss of power 16
  Surge 17
  Spark knock 18
  Cooling system temperature 19
  Poor fuel economy 20
  Emissions compliance 21
Cruise: Stalls/Quits 6
  Misses 12
  Bucks/Jerks 14
  Backfires 13
  Lack/Loss of power 16
  Surge 17
  Spark knock 18
  Cooling system temperature 19
  Poor fuel economy 20
  Emissions compliance 21
Deceleration: Stalls/Quits 6
  Backfires 13

  Reference Value Parameter Identification (PID)/Measured Signal Chart

NOTE: The following listing reflects PIDS and/or measured values which may reveal a possible concern within each system shown. Match the category number with the related PID/measured signal and go to the Typical Diagnostic Reference Value Charts.


Category Number Related PIDS/Measured Signals
5, 10, 17 ACP
1, 23 APP1
1, 23 APP2
23 BOO1/BOO2
18, 19 CHT
1, 2, 3, 5, 6, 7, 11, 12, 13, 14, 15, 16, 17, 20, 21 CKP
1, 2, 3, 5, 6, 7, 11, 12, 13, 14, 15, 16, 17, 20, 21 CMP
10 CPP/PNP
3, 5, 6, 7, 9, 11, 15, 16, 20, 21 DPFEGR
4, 18, 19, 21, 22 ECT
3, 5, 6, 7, 9, 11, 15, 16, 20, 21 EGRMC1 through 4
3, 5, 6, 7, 9, 11, 15, 16, 20, 21 EGRMDSD
3, 5, 6, 7, 9, 11, 15, 16, 20, 21 EGRVR
5, 18, 19, 20, 21 EOT
3, 5, 6, 11, 21 EVAPCV
3, 5, 6, 11, 21 EVMV
20 FLI
1 through 21 FP
1 through 21 FPM
1 through 21 FRP
1 through 21 FRT
5 FTP
1 through 21 FUELPW1/2
1 through 21 FUELSYS (OL/CLSD-LP)
19 HFC
1 through 21 HTR11/12/21/22
2, 3, 5, 7, 8, 10, 22 IAT
2, 3, 5, 7, 8, 10, 22 IAT2
5, 14, 15, 16, 17, 20 IMTV
4, 5, 16, 18, 19, 20, 21 KS
19 LFC
1 through 21 LONGFT1/2
1 through 23 MAF
1 through 23 MAP
1 through 22 MISF
1 through 21 O2S11/12/21/22
22 OSS
10 PSP
5 PTO
1 through 23 RPM
5, 14, 16, 17 SCICP
1 through 21 SHRTFT1/2/11/12/21/22
15, 16, 18, 19, 20, 21 SPARKADVa
1, 23 TP
2, 4, 5, 9, 10, 11, 16, 17, 18, 19, 20, 21 VCT
2, 4, 5, 9, 10, 11, 16, 17, 18, 19, 20, 21 VCTDC/VCTDC2
1, 2, 3, 5, 6, 11, 12, 13, 14 VPWR
22, 23 VSS

  Typical Diagnostic Reference Values

NOTE: Footnotes are referenced throughout the Typical Diagnostic Reference Value Charts. A letter in parentheses next to a value indicates supplemental information is available.

An attempt is made to provide as much information as possible. Some vehicles may not display all input and output signals. The Typical Diagnostic Reference Value Charts do not display fault parameter identifications (PIDs). These are PIDs which indicate a hard fault with the circuit. They display a value of FAULT or NO FAULT and are PIDs ending with the letter F. Reference values may vary 20% depending on operating conditions, altitude, and other factors. The RPM values are axle and tire dependent. Values are taken at an altitude of approximately 189 meters (620 ft) above sea level with the engine at normal operating temperature and accessories off. For detailed transmission diagnostics, refer to the Workshop Manual. Transmission signals may be referred to in either alpha or numeric form. For example, 1=A, 2=B, 3=C.
  • Value is not useful under this condition.
  • Value depends on fuel tank level. Typical operating range is 15% (empty) to 90% (full).
  • Heated oxygen sensors (HO2S) should switch from rich to lean at least once every 3 seconds. HO2S voltage should toggle above and below 0.450 DCV and never be a negative value. Valid HO2S switching occurs only during closed loop fuel control operation.
  • Downstream oxygen sensors stay close to a constant voltage when the catalyst monitor is off (positive value only). When the catalyst monitor is on, the HO2S switches from rich to lean above and below 0.450 DCV and should never be a negative value. For downstream oxygen sensors (12, 22) greater activity results when the catalyst monitor is active.
  • The normal operation value is from -1.5 to 3.5 degrees.

PID Units Measured/PID Component/PID Only Measured/PID Values
KOEO Hot Idle 48KM/H (30 MPH) 89 KM/H (55 MPH)
   PCM  AAT (Deg C) DEG C (DEG F) AAT Sensor 15 (59) 15 (59) 15 (59) 15 (59)
   PCM  AAT_V (V) VOLTS AAT Sensor 3.08 3.08 3.08 3.08
AC_ REQ YES/NO PID NO NO NO NO
   PCM  APP (%) % APP Sensor 0 0 0 0
   PCM  APP1 (V) VOLTS APP Sensor 0.79 0.79 0.79 0.79
   PCM  APP1_[APP_D] (%) % APP Sensor 16 16 16 16
   PCM  APP2 (V) VOLTS APP Sensor 0.40 0.40 0.40 0.40
   PCM  APP2_[APP_E] (%) % APP Sensor 8 8 8 8
   PCM  APP_MAXDIFF (Deg) DEG PID 0 0 0 0
   PCM  BARO (kPa) kPa (PSI) PID 100 (14.50) 100 (14.50) 100 (14.50) 100 (14.50)
   PCM  BARO_V (V) VOLTS PID 3.92 3.92 3.92 3.92
   PCM  BRKOVRD_POSS (Undefined / Not Used) NUMERIC VALUE PID 8 8 8 8
   PCM  BRKOVR_ACTION (Undefined / Not Used) NUMERIC VALUE PID 1 1 1 1
   PCM  CACC_FAN (%) % Charge Air Cooler Cooling Fan 0 0 0 0
   PCM  CACC_FANSTAT STATUS Charge Air Cooler Cooling Fan NO FAULT NO FAULT NO FAULT NO FAULT
   PCM  CAC_T (Deg C) DEG C (DEG F) CACT Sensor 32 (89.6) 32 (89.6) 32 (89.6) 32 (89.6)
   PCM  CAC_V (V) VOLTS CACT Sensor 2.11 2.11 2.11 2.11
   PCM  CATTEMP11 (Deg C) DEG C (DEG F) CAT11 Sensor 428 (802.4) 428 (802.4) 428 (802.4) 428 (802.4)
   PCM  CATTEMP21 (Deg C) DEG C (DEG F) CAT21 Sensor 428 (802.4) 428 (802.4) 428 (802.4) 428 (802.4)
   PCM  CHT (Deg C) DEG C (DEG F) CHT Sensor 99 (210.2) 99 (210.2) 99 (210.2) 99 (210.2)
   PCM  CHT_V (V) VOLTS CHT Sensor 3.34 3.34 3.34 3.34
   PCM  CLRDIST (km) KM (MILES) PID 1 (0.62) 1 (0.62) 1 (0.62) 1 (0.62)
CRNKCAS_PRS Pa (PSI) Crankcase Pressure Sensor -0.10 (-0.01) -0.10 (-0.01) -0.10 (-0.01) -0.10 (-0.01)
CRNKCAS_P_V VOLTS Crankcase Pressure Sensor 3.93 3.93 3.93 3.93
   PCM  DECHOKE YES/NO PID NO NO NO NO
   PCM  DIST_AEIS (km) KM (MILES) PID 0 0 0 0
   PCM  DIST_BRKOVRD (km) KM (MILES) PID 2 (1.24) 2 (1.24) 2 (1.24) 2 (1.24)
   PCM  ECT (Deg C) DEG C (DEG F) ECT Sensor 92 (197.6) 92 (197.6) 92 (197.6) 92 (197.6)
   PCM  EQ_RAT11 (Undefined / Not Used) RATIO PID 0 0 1 1.12
   PCM  ETC_ACT (Deg) DEG PID 7.52 2.46 12.30 4.46
   PCM  ETC_TRIM (Deg) DEG PID -0.03 -0.03 -0.03 -0.03
   PCM  ETC_[TAC_PCT] (%) % PID 9 3 10 5
   PCM  EVAP020C YES/NO PID NO NO NO NO
   PCM  EVAPCP (%) % EVAPCP Valve 0 0 84 19
   PCM  EVAPCV (%) %/NO-YES CANV Valve 0 0 0 0
   PCM  EVAPPCT (%) % PID 0 0 83 19
   PCM  EVAPSOAK YES/NO PID NO NO NO NO
   PCM  EVAPSTA STATUS PID NOT RUNNING NOT RUNNING NOT RUNNING NOT RUNNING
   PCM  EVBV (% Duty Cycle) %/OPEN-CLOSED EVAP Vapor Blocking Valve 0 0 100 100
   PCM  FLI (%) % Fuel Level Sensor 14 14 9 12
   PCM  FLP (kPa) kPa (PSI) Fuel Pressure Sensor 540 (78.32) 464 (67.30) 503 (72.95) 468 (67.88)
   PCM  FLP_V (V) VOLTS Fuel Pressure Sensor 2.66 2.36 2.51 2.37
   PCM  FP (%) % Fuel Pump Control Module 75 23 25 23
   PCM  FPM (%) % PID 40 40 40 40
   PCM  FRP (kPa) kPa (PSI) FRP Sensor 17340 (2514.95) 13790 (2000.07) 11850 (1718.70) 12580 (1824.58)
   PCM  FRP_DSD (kPa) kPa (PSI) PID 2750 (398.85) 2750 (398.85) 12030 (1744.80) 2750 (398.85)
FRT_A DEG C (DEG F) FRT Sensor 52 (125.6) 52 (125.6) 53 (127.4) 54 (129.2)
   PCM  FRT_V (V) VOLTS FRT Sensor 1.33 1.32 1.29 1.28
   PCM  FTP_V (V) VOLTS FTP Sensor 2.39 2.63 2.49 2.39
   PCM  FUELSYS_A_PCT_B1 (%) % PID 0 0 86 0
   PCM  FUELSYS_A_PCT_B2 (%) % PID 0 0 86 0
   PCM  FUELSYS_B_PCT_B1 (%) % PID 100 100 14 100
   PCM  FUELSYS_B_PCT_B2 (%) % PID 100 100 14 100
F_VCV % Fuel Injection Pump 0 0 39 0
   PCM  HFC ON/OFF PID OFF OFF OFF OFF
   PCM  HTR11 ON/OFF HO2S11 Sensor ON ON ON ON
   PCM  HTR12 ON/OFF HO2S12 Sensor ON ON ON ON
   PCM  HTR21 ON/OFF HO2S21 Sensor ON ON ON ON
   PCM  HTR22 ON/OFF HO2S22 Sensor ON ON ON ON
   PCM  HTRCM11 (Amp) mA HO2S11 Sensor 0 0 0 0
   PCM  HTRCM12 (Amp) mA HO2S12 Sensor 0 0 0 0
   PCM  HTRCM21 (Amp) mA HO2S21 Sensor 0 0 0 0
   PCM  HTRCM22 (Amp) mA HO2S22 Sensor 0 0 0 0
   PCM  IAT (Deg C) DEG C (DEG F) IAT Sensor 35 (95) 35 (95) 35 (95) 35 (95)
   PCM  IAT11 (Deg C) DEG C (DEG F) IAT Sensor 35 (95) 35 (95) 35 (95) 35 (95)
   PCM  IAT12 (Deg C) DEG C (DEG F) IAT2 Sensor 46 (114.8) 46 (114.8) 46 (114.8) 46 (114.8)
   PCM  IAT1_V (V) VOLTS IAT Sensor 1.96 1.96 1.96 1.96
   PCM  IAT2 (Deg C) DEG C (DEG F) IAT2 Sensor 46 (114.8) 46 (114.8) 46 (114.8) 46 (114.8)
   PCM  IAT2_V (V) VOLTS IAT2 Sensor 1.53 1.53 1.53 1.53
   PCM  INJPWR_M (V) VOLTS PID 13.41 13.41 13.41 13.41
   PCM  KNK_CNTR_CYL1 (Undefined / Not Used) COUNT PID 0 0 0 0
   PCM  KNK_CNTR_CYL2 (Undefined / Not Used) COUNT PID 0 0 0 0
   PCM  KNK_CNTR_CYL3 (Undefined / Not Used) COUNT PID 0 0 0 0
   PCM  KNK_CNTR_CYL4 (Undefined / Not Used) COUNT PID 0 0 0 0
   PCM  KNK_CNTR_CYL5 (Undefined / Not Used) COUNT PID 0 0 0 0
   PCM  KNK_CNTR_CYL6 (Undefined / Not Used) COUNT PID 0 0 0 0
   PCM  KNOCK_1 (Undefined / Not Used) COUNT KS1 Sensor 35 35 35 35
   PCM  KNOCK_2 (Undefined / Not Used) COUNT KS2 Sensor 47 47 47 47
   PCM  LFC ON/OFF PID OFF OFF OFF OFF
   PCM  LOAD (%) % PID 0.00 30 30 30
   PCM  LONGFT1 (%) % PID (I) -20 TO +20 -20 TO +20 -20 TO +20
   PCM  LONGFT2 (%) % PID (I) -20 TO +20 -20 TO +20 -20 TO +20
   PCM  MAP (kPa) kPa (PSI) MAP Sensor 39 (5.66) 39 (5.66) 39 (5.66) 39 (5.66)
   PCM  MAP_V (V) VOLTS MAP Sensor 0.61 0.61 0.61 0.61
MIL ON/OFF PID OFF OFF OFF OFF
   PCM  MIL_DIS (km) KM (MILES) PID 0 0 0 0
   PCM  MISFIRE TRUE/FALSE PID FALSE FALSE FALSE FALSE
   PCM  MP_LRN TRUE/FALSE PID TRUE TRUE TRUE TRUE
   PCM  NUM_MISFIRE (Undefined / Not Used) COUNT PID 0 0 0 0
   PCM  O2S11_CUR (mA) mA/uA HO2S11 Sensor (I) switching switching switching
   PCM  O2S11_HTR (%) % HO2S11 Sensor 21 40 35 32
   PCM  O2S11_IMPED (V) VOLTS HO2S11 Sensor 5 1.02 1.03 1.03
   PCM  O2S11_READY TRUE/FALSE HO2S11 Sensor FALSE FALSE TRUE TRUE
   PCM  O2S11_TR (Ohm) Kohm HO2S11 Sensor 0 112.10 112.10 112.10
   PCM  O2S12 (V) VOLTS HO2S12 Sensor (I) switching (D) switching (D) switching (D)
   PCM  O2S21_HTR (%) % HO2S21 Sensor 21 42 36 32
   PCM  O2S21_IMPED (V) VOLTS HO2S21 Sensor 5 1.02 1.02 1.02
   PCM  O2S21_READY TRUE/FALSE HO2S21 Sensor FALSE FALSE TRUE TRUE
   PCM  O2S21_TR (Ohm) Kohm HO2S21 Sensor 0 82.20 82.20 82.20
   PCM  O2S22 (V) VOLTS HO2S22 Sensor (I) switching (D) switching (D) switching (D)
   PCM  O2_DS_DISBL TRUE/FALSE PID TRUE TRUE FALSE FALSE
   PCM  OCTADJ_R_LRND (Undefined / Not Used) % PID 0 0 0 0
   PCM  PATSENABL ENABLED / DISABLED PID ENABLED ENABLED ENABLED ENABLED
   PCM  RO2FT1 (%) % PID 0 0.01 -0.01 0.02
   PCM  RO2FT2 (%) % PID 0 0.01 -0.01 0.02
   PCM  RPM (Rpm) RPM CKP Sensor 0 675 1420 1633
   PCM  RPM_DSD (Rpm) RPM PID 900 666 575 575
   PCM  SHRTFT1 (%) % PID (I) -10 TO +10 -10 TO +10 -10 TO +10
   PCM  SHRTFT2 (%) % PID (I) -10 TO +10 -10 TO +10 -10 TO +10
   PCM  SPARKADV (Deg) DEG PID 14.50 2.50 16 25.50
   PCM  SYNC YES/NO PID NO YES YES YES
   PCM  TCBP (kPa) kPa (PSI) TCBP Sensor 99.7 (14.46) 99.7 (14.46) 101.5 (14.72) 100.2 (14.53)
   PCM  TCBP_V (V) VOLTS TCBP Sensor 1.52 1.52 1.55 1.53
   PCM  TP1_LRN_TRIM (Deg) DEG ETBTPS 10 10 10 10
   PCM  TP1_PER (%) % ETBTPS 17 12 15 21
   PCM  TP_REL (%) VOLTS PID 7 2 5 12
   PCM  TQ_CNTRL STATUS PID NONE REQUESTED IDLE SPEED CONTROL NONE REQUESTED NONE REQUESTED
   PCM  TURBO_BP1_STAT FAULT/NO FAULT TCBY Valve NO FAULT NO FAULT NO FAULT NO FAULT
TURBO_BP2_STAT FAULT/NO FAULT TCBY2 Valve NO FAULT NO FAULT NO FAULT NO FAULT
   PCM  TURBO_BPASS (%) % TCBY Valve 0 0 100 100
   PCM  TURBO_WGATE (%) % Turbocharger Wastegate Control 0 0 0 0
   PCM  VCTSYS OPEN LOOP/CLOSED LOOP PID OPEN LOOP CLOSED LOOP CLOSED LOOP CLOSED LOOP
   PCM  VCT_EXH_ACT1 (Deg) DEG PID 0 0.06 1.06 10
   PCM  VCT_EXH_ACT2 (Deg) DEG PID 0 -0.31 0.50 12.69
   PCM  VCT_EXH_DC1 (%) % VCT12 Solenoid 0 0 77 48
   PCM  VCT_EXH_DC2 (%) % VCT22 Solenoid 0 0 67 48
   PCM  VCT_EXH_DIF1 (Deg) DEG PID 0 -0.13 12.63 6.31
   PCM  VCT_EXH_DIF2 (Deg) DEG PID 0 0.31 14.75 4.19
   PCM  VCT_INT_ACT1 (Deg) DEG PID 0 0.19 11.44 29.44
   PCM  VCT_INT_ACT2 (Deg) DEG PID 0 0.25 11.75 29.25
   PCM  VCT_INT_DC1 (%) % VCT11 Solenoid 0 0 39 35
   PCM  VCT_INT_DC2 (%) % VCT21 Solenoid 0 0 40 35
   PCM  VCT_INT_DIF1 (Deg) DEG PID 0 -0.19 5.50 11.81
   PCM  VCT_INT_DIF2 (Deg) DEG PID 0 -0.25 5.69 14.13
   PCM  VPWR (V) VOLTS PID VBAT VBAT VBAT VBAT
   PCM  VREF (V) VOLTS PID 5 5 5 5
   PCM  VSS (Kph) km/h (MPH) PID 0 0 48 km/h (30 MPH) 89 km/h (55 MPH)
   PCM  WGATE_A_POS_PCT (% Open) % Turbocharger Wastegate Motor 1 99.94 99.94 99.83 99.83
   PCM  WGATE_B_POS_PCT (% Open) % Turbocharger Wastegate Motor 2 99.94 99.94 99.94 99.88

    Electronic Engine Controls - 3.5L EcoBoost (272kW/370PS)

    ..

    Electronic Engine Controls - Component Location. Description and Operation

    Electronic Engine Controls- Front Item Description 1 Turbocharger Boost Pressure (TCBP) Charge Air Cooler (CAC) Temperature sensor 2 Right hand VCT oil control solenoids 3 MAPT sensor 4 Crankcase Pressure Sensor 5 Left hand VCT oil control solenoids 6 IAT sensor Electronic Engine Controls- Front ..

    Other information:

    Lincoln Navigator 2018-2025 Workshop Manual: Headliner - Lowering. Removal and Installation


    Special Tool(s) / General Equipment Flat-Bladed Screwdriver Interior Trim Remover Remove the following items: On both sides. Remove the A-pillar trim panel. Refer to: A-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). On both sides. Remove the B-pillar trim panel. Refer to: B-Pillar Trim Pan..

    Lincoln Navigator 2018-2025 Workshop Manual: Front Seat Cushion Cover. Removal and Installation


    Special Tool(s) / General Equipment Interior Trim Remover Removal Passenger seat Remove the OCS . Refer to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). Driver seat NOTE: Seat with power head restraint shown, seat without power head restraint similar. R..

    Categories

    • Manuals Home
    • 4th Gen Lincoln Navigator Service Manual (2018 - 2025)
    • Body and Paint
    • Remote Function Actuator (RFA) Module. Removal and Installation
    • Body Control Module (BCM). Removal and Installation
    • Front Seat. Removal and Installation
    • Transmission Fluid Level Check. General Procedures

    Differential Case Runout Check. General Procedures

    Special Tool(s) / General Equipment

    205-1016
    Installer, Differential Bearing
    TKIT-2014D-ROW2
    TKIT-2014D-FL_ROW 205-153 (T80T-4000-W)
    Handle 205-D061 (D83T-4205-C2)
    Step Plate Dial Indicator Three Leg Puller Punch

    read more

    Copyright © 2025 www.linavigator4.com