Lincoln Navigator: Perimeter Anti-Theft Alarm / Perimeter Anti-Theft Alarm - Component Location. Description and Operation
| Item | Description |
|---|---|
| 1 | Hood latch (with integrated hood ajar switch) |
| 2 | Intrusion sensor |
| 3 | BCM |
Perimeter Anti-Theft Alarm - Overview. Description and Operation
Overview
The perimeter anti-theft alarm system has three operation modes:
ARMED - The perimeter anti-theft alarm is armed when the
ignition is OFF and all vehicle entry points have been electrically
locked for 20 seconds...
Other information:
Lincoln Navigator 2018-2026 Workshop Manual: Intrusion Sensor. Removal and Installation
Removal Remove the overhead console. Refer to: Overhead Console (501-12 Instrument Panel and Console, Removal and Installation). Release the tabs and remove the intrusion sensor. Installation To install, reverse the removal procedure...
Lincoln Navigator 2018-2026 Workshop Manual: Exhaust Gas Recirculation (EGR) Outlet Tube. Removal and Installation
Removal Remove the engine appearance cover retainers, release the engine appearance cover from the rear retainers and then remove the engine appearance cover. Remove the RH side air cleaner outlet pipe...
Categories
- Manuals Home
- 4th Gen Lincoln Navigator Service Manual (2018 - 2026)
- Neutral Flat Tow Activation and Deactivation. General Procedures
- Telematics Control Unit (TCU) Module. Removal and Installation
- Remote Function Actuator (RFA) Module. Removal and Installation
- Transmission Fluid Drain and Refill. General Procedures
- Head Up Display (HUD) Module Calibration. General Procedures
Front Driveshaft. Removal and Installation
Special Tool(s) / General Equipment
Crimping ToolMaterials
Name Specification Motorcraft® Premium Long-Life GreaseXG-1-E1 ESA-M1C75-B
Removal
With the vehicle in NEUTRAL, position the vehicle on a hoist.Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).
Remove the bolts and the transmission shield.
