• Navigator Manuals
  • Service
  • New
  • Top
  • Sitemap
Lincoln Navigator Manuals

Lincoln Navigator: Automatic Transmission - 10-Speed Automatic Transmission – 10R80 / Transmission. Removal

Lincoln Navigator 2018-2026 Workshop Manual / Automatic Transmission / Automatic Transmission - 10-Speed Automatic Transmission – 10R80 / Transmission. Removal

  1. To remove the transmission assembly.
    Refer to: Transmission (307-01 Automatic Transmission - 10-Speed Automatic Transmission – 10R80, Removal and Installation).

    Turbine Shaft Speed (TSS) Sensor. Removal and Installation

    Removal Remove the main control valve body. Refer to: Main Control Valve Body (307-01 Automatic Transmission - 10-Speed Automatic Transmission – 10R80, Removal and Installation)...

    Main Control Valve Body. Overhaul

    Special Tool(s) / General Equipment 307-299Alignment Pins, Valve BodyTKIT-1994-LMH/MH2TKIT-1994-FTKIT-1994-FLM/FM Materials Name Specification Motorcraft® MERCON® ULV Automatic Transmission FluidXT-12-QULV WSS-M2C949-A, MERCON® ULV  For solenoid and valve identification...

    Other information:

    Lincoln Navigator 2018-2026 Workshop Manual: Exhaust Gas Recirculation (EGR) Cooler. Removal and Installation


    Removal Remove the engine appearance cover retainers, release the engine appearance cover from the rear retainers and then remove the engine appearance cover. Remove the RH side air cleaner outlet pipe...

    Lincoln Navigator 2018-2026 Workshop Manual: Trough Assembly. Removal and Installation


    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the roof opening panel glass. Refer to: Roof Opening Panel Glass (501-17 Roof Opening Panel, Removal and Installation). Detach the trough assembly arms...

    Categories

    • Manuals Home
    • 4th Gen Lincoln Navigator Service Manual (2018 - 2026)
    • Vehicle Dynamics Control Module (VDM). Removal and Installation
    • Transmission Fluid Level Check. General Procedures
    • Windshield Washer Pump. Removal and Installation
    • SYNC Module [APIM]. Removal and Installation
    • Rear Bumper. Removal and Installation

    Front Driveshaft. Removal and Installation

    Special Tool(s) / General Equipment

    Crimping Tool

    Materials

    Name Specification Motorcraft® Premium Long-Life Grease
    XG-1-E1 ESA-M1C75-B
     

    Removal

    With the vehicle in NEUTRAL, position the vehicle on a hoist.
    Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).
    Remove the bolts and the transmission shield.

    read more

    Copyright © 2026 www.linavigator4.com