Lincoln Navigator: Vehicle Dynamic Suspension / Vehicle Dynamic Suspension - Component Location. Description and Operation
| Item | Description |
|---|---|
| 1 | Front Shock Absorber (2 required) |
| 2 | Front height sensor (2 required) |
| 3 | VDM |
| 4 | Rear height sensor (2 required) |
| 5 | Rear Shock Absorber (2 required) |
Vehicle Dynamic Suspension - Overview. Description and Operation
Overview
The
semi-active suspension dampening provides improved handling, comfort
and stability by continuously adjusting the adaptive shock absorber
force to the current road and driving conditions...
Other information:
Lincoln Navigator 2018-2025 Workshop Manual: Inspection And Repair After Collision Without Supplemental Restraint Deployment. General Procedures
Inspection If airbags deploy. Refer to: Inspection and Repair after a Supplemental Restraint System (SRS) Deployment (501-20B) . NOTE: Deployable devices such as airbags, pretensioners and inflatable belt inflators, may deploy alone or in various combinations depending on the impact event...
Lincoln Navigator 2018-2025 Workshop Manual: Valve Guide Inner Diameter. General Procedures
Check NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Valve guides tend to wear in an hourglass pattern. The ball gauge can be inserted into the combustion chamber side of the valve guide, if necessary...
Categories
- Manuals Home
- 4th Gen Lincoln Navigator Service Manual (2018 - 2025)
- Rear Bumper. Removal and Installation
- Body Control Module (BCM). Removal and Installation
- All Terrain Control Module (ATCM). Removal and Installation
- Windshield Washer Pump. Removal and Installation
- Body and Paint
Diagnostic Methods. Description and Operation
This document provides critical diagnostic knowledge required for successful repair outcomes. It identifies technical competencies expected by users of this manual.
Ford Diagnostic Assumptions
Ford diagnostics assume the vehicle concern described by the test title is currently present. Exceptions to this rule are noted in each test. Do not replace modules or other components as directed by a diagnostic if the concern is not present at the time of testing.
